Weather Defender Documentation

Using your personalized map, with custom geographic and reference layers, we can start making forecasts and predicting when severe weather will approach your site.

We are not able to practice forecasting a real severe weather event, but we can show you the forecasting tools and layers that are available in Weather Defender so you can put them to good use when the need arises.

This tutorial assumes you have completed the Getting Started tutorial. It is recommended that you have also completed the Personalizing Your Map tutorial.


3 to 7 Days Out

Your event is 7 days away. Lets start by checking out this week's forecast.

Step 1
First, center the screen on your home location.

Next, select the Forecast Tool from the toolbar.

You can also press CTRL+SHIFT+F on the keyboard to activate the Forecast Tool.
Now click on your home location.

An small window will pop-up with the 7-day Forecast for your location:


We've all seen 7-day forecasts before, that is nothing special. What is unique about this feature in Weather Defender is that the forecast is based on the exact position (latitude & longitude) of your mouse click:


This means that you are not getting the forecast of the nearest major city. You are getting the pinpoint forecast for your exact site.

The Forecast tool works on any location in the United States, except Alaska.


1 to 3 Days Out

Your event is just a few days away and there is a chance of thunderstorms according to the forecast. Let's find out what the experts are predicting.

Step 2
Open the Layer Browser (Add Layers > Browse All Layers).

Navigate to the Forecast category.

Add the following layers to your map:
  • Day 1 Convective Outlooks
  • Day 2 Convective Outlooks
  • Day 3 Convective Outlooks

About Convective Outlooks
The term 'convective' refers to thunderstorm-type weather, i.e., weather which can produce tornadoes, hail, and damaging winds. These outlooks are produced daily by the expert forecasters at the Storm Prediction Center in Norman, Oklahoma and serve as an excellect guide to those of us who want to be aware of damaging weather situations.

Outlooks are defined for broad regions and categorized by risk level:
  • General Thunderstorms
  • Slight Risk of Severe Weather
  • Moderate Risk of Severe Weather
  • High Risk of Severe Weather

The periods cover the following ranges:
Day 1Today! (Forecast for the next 24 hours)
Day 2Tomorrow: Forecast for 24 to 48 hours
Day 3Forecast for 48 to 72 hours

More details can be found on the SPC's website.
Close the Layer Browser.

Step 3
The 3 layers you just added will appear under the Ungrouped layer group in the Map Layers window.

Edit the Ungrouped settings (click the gearshaft icon).

Change the name of the group to Outlooks. Set the behavior to Single-Select.

De-select Day 2 and Day 1 Outlooks, so that only Day 3 is active.

Now you may see an orange, green or other colored line drawn on your map. This line represents the area of concern.


Note: If you do not see any lines in the Continental U.S., it means no severe weather is forecasted for that period.

Step 4
If a forecast line is present on the map, you will also see a blue information icon near the label of the line:


Click the icon to review the full forecast text:


Note: SPC forecasts are very technical in nature and meant primarily for other forecasters and not the general public. However, if you practice reading these, over time you will begin to understand what elements forecasters look for when predicting severe weather and it can lead to better decision making on your own part.

For your reference, the SPC provides this glossary of abbreviations used in their forecasts:


1 Day Away

Your event is tomorrow. Severe weather is still expected, but how accurate are the forecasts? Let's take a closer look.

Step 5
Select Day 2 Outlooks from the Map Layers window. You will see that Day 3 is automatically de-selected per the group's behavior of Single-Select.

Review the Day 2 forecast. How does it compare with yesterday's Day 3 forecast? Have the threat levels increased or decreased? Are the areas of concern similar or different?

When forecasts "agree" with each other, that is worth noting because it means the prediction is more likely to be accurate.

For example, if yesterday's Day 3 Outlook was predicting a Slight Risk of Severe Weather for the midwest, and today's Day 2 Outlook was predicting the same, there is a fairly good chance that the midwest will in fact see some severe weather tomorrow.

Step 6
Open the Layer Browser and navigate to the Forecast category.

Add the Advisories layer to your map and close the Layer Browser.


About Advisories
Advisories are issued by the National Weather Service for weather which may impact your activities. These can run the gammut of weather phenomena including Winter Storms, Freezing Fog, Flooding, High Winds and numerous other types of weather. These are usually issued for specific counties the day of or a few days before an expected occurence. Advisories should be monitored but usually action is not necessary unless the Advisory is upgraded to a Watch or Warning.


Day of Event

Your event is today! The forecasts are in agreement that a Slight Risk of Severe Weather is expected for your region. Do you cancel or proceed?

Step 7
Review today's severe weather threat using the the Day 1 Outlook and Advisories layers we added in previous steps.

Plan accordingly. At this point, all you know is that severe weather is expected for a relatively broad region. It would be premature to cancel your event. Many times the same ingredients that lead to severe weather (warm temperatures, lots of daytime heating) can also result in the most beautiful summer days.

But you can at least can be prepared with a contingency plan, such as an indoor alternative should the worst case happen.


4 to 8 Hours Out

The event will proceed as scheduled. You are aware of the potential for severe weather, but when and where will it occur?

Step 8
Open the Layer Browser.

Navigate to the Forecast category and add the Mesoscale Discussions layer to your map. Then close the Layer Browser.

About Mesoscale Discussions
Mesoscale Discussions (or MDs for short) are short-term, small-region forecasts issued about 2-6 hours before the expected event (also by the SPC). These are excellent forecasts because they cover a tighter region and are more specific about the threat expected.
Check every hour or so to see if any Mesoscale Discussions have been issued for your region.


2 to 4 Hours Out

The guests will be arriving shortly. To ensure everyone's safety, you must keep a close watch on developing weather.

Step 9
Open the Layer Browser.

Navigate to the Severe Weather category.

Add the Watches layer to your map.

Then close the Layer Browser.


About Watches
Watches provide information about threatening weather that is expected. They are issued about 1-4 hours before the event is expected to begin for a multi-county area. They are more specific than Mesoscale Discussions or Convective Outlooks.

You have heard of Tornado Watches before. This simply means that tornado-capable storms are expected to form in the forecasted area any time in the next 4-6 hours.
Be sure to monitor for Watches throughout the day as these will likely be your first indication that severe weather is imminent.


1 Hour to Live

The guests are arriving and your event is getting underway. You have done a fantastic job of keeping track of the forecasts and monitoring for severe weather threats at your site. Now it is just a matter of monitoring the weather situation until the event is over.

Step 10
Expand the Add Layers menu (do not open the Layer Browser) and select Warnings from the list.


About Warnings
Warnings are issued when Severe Weather is imminent or occurring. They are usually issued within a few minutes to an hour before the threat is expected.

Some warnings types, such as Tornado or Severe Thunderstorm warnings are extremely dangerous and should be responded to with immediate action if issued for your county.
Weather Warnings should be monitored throughout the period. If a warning is issued for your county, you may need to cancel your planned activities and in some cases (Tornadoes and Severe Thunderstorms) you may need to seek shelter immediately.



Even though severe weather was expected, you knew when and where it would occur, and you had contigency plans in place. Thanks to your careful planning and knowledge of the local weather situation, the guests were safe and event your event was a smashing success!

Step 11
Now that we have a good map configuration for forecasting severe weather, let's save the changes to a different file so we don't need to repeat all of these steps next time -- we can simply load the map file with all of the layers from disk.

Click the Shield icon in the upper-left of the main window. This will expand a menu with special functions for saving maps:


Click Save Map As.

On the Save File dialog, enter the name and click Save.

You have now saved your map under a different filename that you may refer back to using the Open button on the toolbar or Shield menu.


Your have complete the Forecasting tutorial. You know how to:
  • Obtain pinpoint forecasts up to 7 days in advance with the Forecast tool
  • Forecast Severe Weather 3 days in advance with Convective Outlooks
  • Monitor the location and timing of specific weather threats with Watches, Warnings, and Advisories

What about the times when you don't have access to a computer to monitor the weather situation?

Learn how to automatically receive weather alerts via e-mail or SMS text in the next tutorial:
  • Creating Perimeter Alerts

Weather Defender® - Desktop Weather Software for your PC. Weather Satellite, Weather Radar, and Street-Level Weather Tracking.

Images and text Copyright © 2008-2019 by SWIFT Weather. All rights reserved. ScrewTurn Wiki version 2.0.35.